Rigid PCB Equipment
OSP production line

Process flow

feeding→degreasing→pump rinsing→tap water rinsing→micro-etching→pump rinsing→tap water rinsing→pickling→pump rinsing→tap water rinsing→blot up→wind shear→OSP→pump rinsing→pump rinsing→tap water rinsing→blot up→cool air bolt→hot air drying→discharge

Feature

Comprehensive Explanations

1)Spraying system

(1) Degrease , micro-etching, pickling using quick release ,convenient maintenance and cleaning

(2) Rinsing part using PVC small nozzle

2) The filtration system

Using multiple filtration system to protect the pump and spraying nozzle. Especially maintenance, our use can be used repeatedly.

3) Transmission system

(1) Adopts frequency conversion motor, imported PVDF pin gear, to ensure strength, wear resistance, corrosion resistance and transmission uniformity.

(2) With hard wheel structure, smooth surface to ensure smooth delivery, will not scratch.

(3) Wheel base is 40mm.

(4) Main transmission is used the inner and outer structure of a structure. And in the choice of

materials is very unique: imported PVDF material inner sleeve, outer with UPVC material, thus ensuring a more wear-resistant and durable.

(5) The braking system: the general button control, the highly humanized operation, and ensure the high quality and long life.

(6) The tanks are made of tilting Bottom, can drain the tank residue for easy cleaning.

(7) Wire on the top of the machine, safe and beautiful.

(8) Tap water rinsing with solenoid valve and a separate manual switch, and with a flow meter, automatic control spray, and can adjust the amount of water.

(9) The exhaust pipe on the top, make the each part independently and adjustable.

(10) This line is equipped with head and tail are emergency stop switch, so in an

emergency, the full range of rapid braking.

Specification

1) Dimension

11127mmL*1650mmW*1935mmH

2) Working pieces

600mmL*600mmW(Max)

150mmL*150mmW(Min)

0.2mm~3.2mm(thickness)

3) Transfer speed

1~4m/min(adjustable)

4) Working surface high design

1.8~2.5m/min(adjustable)

5) Transmission surface high

950±20mm

6) Transmission width

630mm

7) Diameter of transmission wheel

Φ40mm

8) Transmission wheel base

50mm

9) Power supply

380V/AC/50HZ/38KW

10) Water consumption

10~20L/min

11)Process flow direction

from left to right (front)

12)Control system

button

13)Control box place

Overhead cabling

14)Waster water pipe

one drainage pipe

15)Water inlet

one tap water pipe

OSP line video

Send Your Message

Looking forward to providing you with satisfactory products and services.

info@everest-machinery.com