Single side photosensitive ink coater is a new type of equipment that uses coating rollers to roll at the same time to coat a layer of photosensitive ink or glue and coating with specific functions on the surface of the substrate.The equipment has compact structure, stable performance, safe and convenient operation, and the coating width can be customized according to customer requirements.
Feature
Single side photosensitive ink coater is a new type of equipment that uses coating rollers to roll at the same time to coat a layer of photosensitive ink or glue and coating with specific functions on the surface of the substrate.The equipment has compact structure, stable performance, safe and convenient operation, and the coating width can be customized according to customer requirements.
The substrate is transported by white silica gel roller or stainless steel roller, and then coated after passing through automatic dust sticking roller and dust sticking paper roll device, so as to effectively avoid quality problems such as foreign matters on the plate surface.The coating roller is made of raw materials imported from Germany. It rolls and the ink does not enter the hole.Equipped with ink agitator and filter device, it can fully mix ink and filter impurities, improve production quality. Compared with traditional manual screen printing machine, it has the advantages of high efficiency, low cost, low energy consumption, ink recycling, waste free, simultaneous interpreting of electricity saving and simple operation.
Therefore, the coater is gradually replacing the traditional equipment such as manual single-sided silk screen printing, and has been successfully used in secondary metal etching, PCB circuit board, electroforming standard and other industries.
Specification
Power Supply
|
AC220V/50HZ
|
Total power
|
900W
|
Output speed
|
8~12m/min
|
Coating wheel size
|
ø120x750mm
|
Ink thickness
|
0.022~0.030mm
|
Thickness of coated plate
|
0.8~3.0mm
|
Power configuration
|
Feeding motor: 2sets of 400W gear speed regulating motors
Mixing motor: 1 set of 25W gear constant speed motor Ink pump: one pneumatic diaphragm pump (6kg air pressure) |
Feeding mode
|
Stainless steel roller conveyor
|
Transmission mode
|
Gear and sprocket drive
|
Height of conveying surface
|
1000mm (according to customer requirements)
|
Maximum Coating Size
|
650mm
|
Minimum Coating Size
|
100mm
|
Design of ink collecting device
|
There is a recycling system
|
Equipment weight
|
About 500kg
|
Overall dimension
|
L1100xW1364xH1265
|
Operation mode
|
Human machine interface touch operation
|
Looking forward to providing you with satisfactory products and services.
info@everest-machinery.com